SLOTTED COUNTERSUNK SCREWS

MATERIAL
NYLON 6.6
COLOR
NATURAL
NOTE
Plastic screws are fasteners used for assembling plastic components.
Nylon screws can be used with or without nuts and bolts . Plastic screws are lightweight, tough, resistant to corrosion, and have good electrical-insulating properties.
CONFORM TO DIMENSIONAL TOLERANCES: ISO 2009 - NF E 25-123 - DIN 963
Image
Technical design
SIZES
CODE D D1 L L1 L2 THREAD FILETTO
2733 VTSM2X4 4 0,6 4 1,2 0,5 M2 0.4
2734 VTSM2X5 4 0,6 5 1,2 0,5 M2 0.4
2735 VTSM2X6 4 0,6 6 1,2 0,5 M2 0.4
2736 VTSM2X8 4 0,6 8 1,2 0,5 M2 0.4
2737 VTSM2X10 4 0,6 10 1,2 0,5 M2 0.4
2738 VTSM2X12 4 0,6 12 1,2 0,5 M2 0.4
2739 VTSM2X16 4 0,6 16 1,2 0,5 M2 0.4
2740 VTSM2X25 4 0,6 25 1,2 0,5 M2 0.4
2750 VTSM3X4 6,3 0,8 4 1,7 0,9 M3 0.5
2751 VTSM3X6 6,3 0,8 6 1,7 0,9 M3 0.5
2752 VTSM3X9 6,3 0,8 9 1,7 0,9 M3 0.5
2753 VTSM3X10 6,3 0,8 10 1,7 0,9 M3 0.5
2754 VTSM3X12 6,3 0,8 12 1,7 0,9 M3 0.5
2755 VTSM3X16 6,3 0,8 16 1,7 0,9 M3 0.5
2756 VTSM3X20 6,3 0,8 20 1,7 0,9 M3 0.5
2757 VTSM3X25 6,3 0,8 25 1,7 0,9 M3 0.5
2758 VTSM3X30 5,6 0,9 30 1,7 0,7 M3 0.5
2760 VTSM4X6 9,4 1,2 6 2,7 1,3 M4 0.7
2761 VTSM4X8 9,4 1,2 8 2,7 1,3 M4 0.7
2762 VTSM4X10 9,4 1,2 10 2,7 1,3 M4 0.7
2763 VTSM4X12 9,4 1,2 12 2,7 1,3 M4 0.7
2764 VTSM4X16 9,4 1,2 16 2,7 1,3 M4 0.7
2765 VTSM4X18 9,4 1,2 18 2,7 1,3 M4 0.7
2766 VTSM4X20 9,4 1,2 20 2,7 1,3 M4 0.7
2767 VTSM4X25 9,4 1,2 25 2,7 1,3 M4 0.7
2768 VTSM4X30 9,4 1,2 30 2,7 1,3 M4 0.7
2769 VTSM4X35 9,4 1,2 35 2,7 1,3 M4 0.7
2770 VTSM4X40 9,4 1,2 40 2,7 1,3 M4 0.7
2771 VTSM5X6 9,2 1,4 6 2,5 1,2 M5 0.8
2772 VTSM5X8 9,2 1,4 8 2,5 1,2 M5 0.8
2773 VTSM5X10 10,4 1,2 10 2,7 1,4 M5 0.8
2774 VTSM5X12 10,4 1,2 12 2,7 1,4 M5 0.8
2775 VTSM5X16 10,4 1,2 16 2,7 1,4 M5 0.8
2776 VTSM5X18 10,4 1,2 18 2,7 1,4 M5 0.8
2777 VTSM5X20 10,4 1,2 20 2,7 1,4 M5 0.8
2778 VTSM5X25 10,4 1,2 25 2,7 1,4 M5 0.8
2779 VTSM5X30 10,4 1,2 30 2,7 1,4 M5 0.8
2780 VTSM5X35 10,4 1,2 35 2,7 1,4 M5 0.8
2781 VTSM5X40 10,4 1,2 40 2,7 1,4 M5 0.8
2782 VTSM5X50 10,4 1,2 50 2,7 1,4 M5 0.8
2783 VTSM5X60 10,4 1,2 60 2,7 1,4 M5 0.8
2784 VTSM6X8 12,6 1,6 8 3,3 1,6 M6 1.0
2785 VTSM6X10 12,6 1,6 10 3,3 1,6 M6 1.0
2786 VTSM6X12 12,6 1,6 12 3,3 1,6 M6 1.0
2787 VTSM6X16 12,6 1,6 16 3,3 1,6 M6 1.0
2788 VTSM6X20 12,6 1,6 20 3,3 1,6 M6 1.0
2789 VTSM6X25 12,6 1,6 25 3,3 1,6 M6 1.0
2790 VTSM6X30 12,6 1,6 30 3,3 1,6 M6 1.0
2791 VTSM6X40 12,6 1,6 40 3,3 1,6 M6 1.0
2792 VTSM6X50 12,6 1,6 50 3,3 1,6 M6 1.0
2793 VTSM6X60 17,3 2 60 4,7 2,3 M6 1.0
2794 VTSM8X16 17,3 2 16 4,7 2,3 M8 1.25
2795 VTSM8X20 17,3 2 20 4,7 2,3 M8 1.25
2796 VTSM8X25 17,3 2 25 4,7 2,3 M8 1.25
2797 VTSM8X30 17,3 2 30 4,7 2,3 M8 1.25
2798 VTSM8X40 17,3 2 40 4,7 2,3 M8 1.25
2799 VTSM8X50 17,3 2 50 4,7 2,3 M8 1.25
2800 VTSM8X60 17,3 2 60 4,7 2,3 M8 1.25
2801 VTSM10X20 18 2,6 20 5 2,3 M10 1.5
2802 VTSM10X25 18 2,6 25 5 2,3 M10 1.5
2803 VTSM10X30 18 2,6 30 5 2,3 M10 1.5
2804 VTSM10X35 18 2,6 35 5 2,3 M10 1.5
2805 VTSM10X40 18 2,6 40 5 2,3 M10 1.5
2806 VTSM10X50 18 2,6 50 5 2,3 M10 1.5
2807 VTSM10X60 18 2,6 60 5 2,3 M10 1.5
SLOTTED COUNTERSUNK SCREWS

Searching for slotted countersunk screws?

If you are looking for plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws or if you are looking for miniatures then you are definitely on the right site because Panozzo has an almost endless array of all types of fasteners and fixings to meet the needs of all users.

The ability to rapidly manage the supplying of fasteners and fixings, thanks to an always well-stocked warehouse and to the continuous technological innovation for the management of customer orders, makes Panozzo a reference point for fastening systems which exclude the use of metal.

A strong point is our website www.panozzosrl.com, which is structured according to the use of products such slotted countersunk screws and with the images of the plastic fasteners well in evidence.

From the site www.panozzosrl.com, you can request free samples of slotted countersunk screws, offers on plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws and/or PDF catalog of fastening systems which exclude the use of metal.

Our fasteners and fixings are able to provide solutions for various sectors: in the section of the fasteners and fixings you can find the screw in plastic for the mechanical, the miniatures for spare parts for the body work, the fasteners for boating, the screw for modelling or plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws for automotive.

Utilized materials also of plastic such as nylon 6.6 and Teflon which are required fastening systems which exclude the use of metal.

Why utilized fasteners and fixings

Often, for various technical and safety requirements, there is the obligation to eliminate potential electrical conductors and then one must to use alternative materials such as plastic, which guarantees the same mechanical properties of metals but without having their negative characteristics.

The production of slotted countersunk screws is made almost exclusively in PA 6.6. This material is a polyamide belonging to the family of the most popular thermoplastic nylon 6.6 with nomenclature, great for fastening systems which exclude the use of metal. For particular uses it can be assessed by the production of miniatures Teflon

It is possible to be connected in an appropriate manner between those elements of plastic, using plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws that are not easily subject to wear, assuming you do not reach high temperatures which are higher than 100 ° C:, in this case that would cause significant deformation preventing them from fulfilling their main task properly. In this case you have to think about using other materials such as Teflon.

modelling is one of the sectors which uses, with a certain regularity, slotted countersunk screws of plastic thanks to their valuable technical characteristics, so if you need circles screw in plastic for models, all your needs are met with our selections of fasteners and fixings.

Compared to the metal version, plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws offer undoubted advantages such as: less weight, insulation, non-corrosivity, high attenuation, high resistance to vibration and easier handling

Where to find fasteners of plastic? Simple! In the fasteners and fixings of our site you can find all the fastening systems which exclude the use of metal you're looking for.

The fastening systems which exclude the use of metal Panozzo can be used in commercial vehicles and for the installation of industrial vehicles, for which it is essential to ease the installation of fasteners of plastic and screw in plastic.

The use of plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws is provided for vans, for trucks, for vehicles, for trailers,for buses and for coaches.

The objective of Panozzo is to help companies make the best purchase. This is why we offer the fastening systems which exclude the use of metal that are closer to customer's needs.

Panozzo has a well-stocked warehouse of over 700 square meters.

For Panozzo quality is everything. The articles for the body, such as plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws , are specifically designed to allow a perfect body repair of any type of car. All fasteners and fixings and screw of plastic that you find in the catalog are available in our warehouse and will be shipped as soon as possible, because for us it is crucial that every customer receives the fasteners in plastic they need to do their work as quickly as possible. Navigate in the category fasteners and fixings to discover all our products we provide.

Where to find fasteners and fixings

If you are looking plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws , screw in nylon 6.6 to drive fasteners of plastic for the body or for the preparation of the vehicles you will definitely find all in the site category fasteners and fixings. When it comes to miniatures in plastic it is expected to be a major commodity for the repair of a car because it's not easy to find. Thanks to our careful attention to product quality, you will have screw of plastic both viable and efficient. Browse the category fasteners and fixings and find the fasteners in plastic for the body that you need most.

Panozzo can become your only point of reference for the purchase of nautical accessories of plastic regarding fastening systems which exclude the use of metal as the screw of plastic and fasteners in plastic.

For the realization of exhibitors assembled with fasteners and fixings or interlocking, slotted countersunk screws are also used.

With extensive expertise in consulting, design and production of molded parts in plastic and clear slotted mushroom head screws (slotted countersunk screws), our offer of fasteners of plastic may extend over several fields of application in the electrical and electronic industries.

The fasteners and fixings are in the car, on the shelves, in furniture, machinery, in the home fixtures, household appliances, computer and therefore almost anywhere you find fasteners in plastic

In many situations it is necessary to intervene by removing the materials that may be electrical conductors or which may be subject to dangerous corrosion processes for the structures that use fasteners and fixings. In these cases it is necessary to replace metal parts with fastening systems which exclude the use of metal which, however, possess the same durability characteristics.

The screw in plastic, for example miniatures of plastic, is used especially in those cases in which the elements are subjected to strong corrosion for long periods, in which even hardened steel is unable to withstand. It also has good elastic properties that can provide adequate resistance to vibrations.

Back to top